Easy installation, just mount it in place and plug it in. A single button starts and stops the timing cycle. The time is set easily with the intuitive pushbutton switches located on the side.
Wide Timing Range
Counts down anywhere between 1 second to 100 hours.
The time counts down from preset time. Green stack light illuminates while timing. At the end of the time cycle, the alarm sounds and red stack-light LED illuminates. Front button is illuminated whenever power is connected.
Typically powered from 120VAC but can be adapted to run from any line power: 12VDC, 24VDC, 24VAC, 240VAC.
T9-2 has a double stacklight (red/green). When timing the green light illuminates. When cycle is over, the red stack illuminates and buzzer sounds.
Includes a relay output to control devices. The T9-2 has a relay output available to control devices.
T9-3 has a triple stack light (red/gree/amber) used with the "early warning" mode. When a cycle commences, the green light illuminates. When the "early warning" time has been reached the amber light illuminates. When the cycle is over the red light illuminates at the same time the buzzer sounds. The T9-3 does not have a relay output available.