Easy to adjust the depth of the Tank Alarms - just loosen the nut on the compression tank fitting and slide the alarm to the correct depth. Adapters for any mounting situation. (2" NPT, bolt-on flange, bulkhead feedthrough etc. (see options section below)
When liquid level activates the float, the LED flashes and buzzer sounds. The buzzer can be silenced by pressing the pushbutton while the LED continues to flash until the liquid level is corrected. Snooze alarm every 30 minutes until the level is corrected. Resets automatically when level is corrected.
Power save feature limits the alarming to 60 minutes of full output and if it is ignored, then the alarm output is reduced to 6 seconds every 30 minutes. This allows a single battery to alarm continuously for many weeks!
Different behaviors that are field selectable:
- Tank filling mode alarms when a tank is filled,
the pushbutton shuts off both buzzer and LED until the next filling.
- Snooze alarm (on/off)
- 2A relay output available. (requires circular connector option to connect)
- Delayed output.
- Auto or manual reset.
All modes feature a low battery alert has a distinct stacatto tone.
Float is protected inside the pipe so it can't get damaged. The screw-on float guard can easily be removed to inspect the float. Optional screened float guard protects the float switch from solids, debris or insects.
Weatherproof - all NEMA 4X construction. Suitable for outdoor installation.
Any Depth. Standard depths available up to 5 ft. Custom depths have been made 20 feet deep.
- Polypropylene modles have all PP wetted parts. (float switch, pipe)
- PVDF (Kynar) models have a reversible float.
- 316 Stainless steel floats are reversible.
Every unit includes Lithium battery, tank mount, and a threaded bushing to adapt the 1" NPT threads to 2" NPT. threads.