Digital Timer counts down from the time you set. When the cycle is completed, a very loud 103dB warbling buzzer sounds and the beacon LED flashes. Resets automatically to the same time for the next cycle. Easy to program with only three pushbuttons.
Many possible operating modes are selectable with switches inside the box. You can control if a cycle is able to be cancelled or not, automatic cycle end or manual, timing in HH:MM or MM:SS, relay orientation, repeating cycles, guard duty. See details in the instructions below.
Waterproof, corrosion-proof IP65 (NEMA 4X) enclosure is built for plating lines, commerical kitchens, factories, wet or corrosive environments., indoors or out.
Easy to set the time: the blue buttons adjust the time up or down. The large green button starts and stops the time cycle, or cancels a cycle if permitted by the mode.
A beacon LED gives the timer very high visiblity if needed.
Magnetic feet allow the timer to be mounted on steel surfaces like the front of an oven.
Different buzzer tones so different timers can be distinguised audibly.
Volume control allows continuously variable volume.
The Loudest Buzzer
This is the loudest buzzer we know of on a digital timer. Don't be fooled by volume ratings from other manufactuers as they may give a high volume number but this is meaningless without knowing the distance! more info
Once the countdown time reaches zero, the time then counts the overrun so you know how long the timer has been alarming.
Extremely lower power circuitry allows the 9V battery to last for years.
Auxilliary 9VDC output is built-in to power dataloggers, autodialers or other external devices.
Digital Timer Battery Powered Models
T4 - battery powered with buttons on the outside to easily set different time cycles.
T7 - same as T4 but the time is set with buttons inside the box for repetitive timing, or where the time must not be changed by unauthorized people.